Besides the car and sci-fi subjects, we tested the inductive LED modules on an AFV subject.
Scale model : 1/35 M1114 Up-Armoured HA (Heavy) Tactical Vehicle
LED module : LM-54W (White) x 2
: LM-54R (Red) x 2
01 Headlights
This time, instead of building the box to hold the LED, we simply use hot glue to fix the LED in place.
Testing the result.
Place the inductor bodies in the engine compartment.
02 Tail lights
Using hot glue to fix the LEDs in place.
Place the inductor bodies inside the trunk.
03 Summary
The installation of LED modules is pretty straight forward. This time, instead of building a holding box, we simply use the hot glue to fix the LEDs in place. It's much quicker and simple.
Strictly speaking, this Humvee is still a car subject. AFV subject may not have many options when it comes to installing LEDs, but using your creativity is the fun of building models.
I hope this demo will help and give you some inspiration. There are no fixed rules for installing the LED module. Creativity is always the key. Have fun and happy modeling!
Comments